How high should a pendant light be hung above a table?

6 oct 2026
Suspension dôme à environ 75 cm au-dessus d'une table dressée pour le dîner

Place the bottom of your pendant light between 60 and 80 cm above the table, with 75 cm as a guide. Always measure from the top of the table, never from the floor. With a standard table height of 75 cm, the bottom of the light fixture will therefore be between 1.35 and 1.55 m from the floor.

This guide shows you how to measure without mistakes, then how to adapt this guide to your light fixture, your ceiling, and your table. If you just want to know the length to allow for, go directly to the table according to ceiling height.

What height for a pendant light above a table?

The rule is a range of 60 to 80 cm of clear space between the top of the table and the lowest point of the light fixture. The 75 cm guide is suitable for the vast majority of pendant lights and tables. Start with this figure, then adjust by a few centimeters if necessary.

1 m75 cm75 cm1,50 mPlafond à 2,50 m
With a 75 cm table and 75 cm of clear space, the bottom of the light fixture is 1.50 m from the floor. The cable and the light fixture descend together by about 1 m from a 2.50 m ceiling.

Why 75 cm?

This range meets three needs that come up at every meal.

  • See the people across from you. When seated, your gaze should pass under the light fixture. At 75 cm, it meets the gaze of others without obstruction, from one end of the table to the other.
  • Avoid glare. Low enough, the lampshade hides the bulb from seated people. Too high, the bulb ends up right in the field of vision.
  • Concentrate the light. The closer the light fixture is to the table, the more the light concentrates on it. Standing up, it should not block the view of the room.
Black Sombora dome pendant light above a wooden dining table, in front of a window
The Sombora aluminum pendant light. Its wide lampshade directs the light towards the table.

Too low or too high, what happens?

At less than 60 cm from the table, the light fixture cuts the conversation in two. You risk bumping into it when getting up or serving, and the central dish or large glasses brush against it.

At more than 80 cm, the light disperses and the table looks dull. The bulb becomes visible and glares. The light fixture also seems to float in the room, with no connection to the table.

How to measure the height of your pendant light?

The most common mistake is to reason from the floor or from the ceiling. Your real reference remains the top of the table. Follow these four steps.

  1. Measure the ceiling height. Do it just above the center of the table, where the light fixture will be.
  2. Measure the height of the table. It generally revolves around 75 cm.
  3. Calculate the drop. This is the total length to allow for, cable and light fixture included. Subtract the table height from the ceiling height, then 75 cm. For example, 250 − 75 − 75 = 100 cm.
  4. Check on site. Sit down and ask someone to hold the light fixture at the planned height. You must see the faces across from you without seeing the bulb.

Also look at the height of the light fixture on its product sheet, because it counts in the drop. A 45 cm high chandelier under a 2.50 m ceiling leaves only 55 cm of cable to stay 75 cm from the table. The light fixture then takes up almost half of the drop.

How to adjust the height according to the light fixture?

The 75 cm is a starting point. Depending on the size and material of your pendant light, you will go towards the top or the bottom of the range. An opaque material stops the light. A diffusing material lets it through and makes it softer.

Large opaque or wide model: 75 to 80 cm

Domes, discs, and large lampshades are placed at the top of the range. Lower down, they would block the view. This is the case of the Velmora pendant light in Ø 60 cm and the Brisora pendant light in large diameter.

White Velmora crescent-shaped pendant light above a long raw wood table
The Velmora resin plaster-effect pendant light. Its wide volume is adjusted rather towards 75 to 80 cm from the table.

Medium model, in fabric or openwork material: about 75 cm

Here, the guide applies without correction. The Calora and Velora pendant lights fall into this group. Their fabric or weave filters the light.

Small diffusing model: 65 to 70 cm

A small opal glass globe, a milky white glass, or a paper sphere gives a soft light. You can therefore bring it closer to the table. The small diameter Sérora pendant light and the Galéora pendant light installed in several are well suited to this setting.

Chandelier or long light fixture: 75 to 80 cm

Measure under the lowest point, because the pendants and arms often protrude. The Sylvara chandelier and the Pruméa chandelier are adjusted this way.

Sylvara chandelier in golden branches and crystal above a set dining table
The Sylvara chandelier has crystal pendants. Measure the 75 to 80 cm under the lowest pendant.

Height and diameter go together, because a light fixture that is too small will look lost at 75 cm. To find the right diameter, read our guide what size pendant light above a table.

Several pendant lights aligned: a single height

Above a rectangular table, set two or three identical pendant lights exactly at the same height, in the range of 60 to 80 cm. On a straight line, the slightest offset is seen immediately.

  • Small pendant lights in series. Often compact and diffusing, they can go down to 65 to 70 cm.
  • Spacing. Leave at least their diameter between two light fixtures. For models of 25 to 35 cm, this makes about 60 to 80 cm between their centers. The set occupies half to two-thirds of the length of the table.
  • Group at staggered heights. Above a round table, it is the lowest globe that must respect the 60 to 80 cm.
Two Velora pendant lights lit, at the same height, above a dining table
Two Velora pendant lights of Ø 60 cm above a long table. On a straight line, they are adjusted at the same height.

The Doréa triple pendant light has three cables adjustable up to 120 cm. You can align its lampshades or deliberately offset them.

Doréa triple pendant light in woven bamboo at staggered heights above a table with a bouquet
The Doréa pendant light in woven bamboo, at staggered heights. The lowest lampshade serves as a guide for measuring.

What pendant light height above the table according to the ceiling?

The ceiling height does not change the 75 cm rule above the table. It only changes the length of cable to allow for. Locate your ceiling in this table.

Ceiling height Drop to allow for, cable and light fixture What you need to know
Less than 2.40 m Less than 90 cm The pendant light remains possible above the table, because no one passes through it standing up. Choose a low model.
2.50 m
standard ceiling
About 1 m The adjustable cable is essential. A low light fixture leaves more margin.
2.70 m About 1.20 m Check that the provided cable is long enough.
3.00 m About 1.50 m Allow for a long cable of 1.5 to 2 m.
3.20 m and more About 1.70 m and more Allow for a 2 m cable or a high light fixture. For a central chandelier, aim for a light fixture height of about 20 to 25% of the ceiling height.

For a standard ceiling, all our advice is gathered in the guide what pendant light for a 2.50 m ceiling. The Pruméa chandelier, only 24 cm high, easily finds its place there.

Beyond 3 m, the Brisora pendant light descends without an extension, with its adjustable cable up to 200 cm. You will find the proportions in our guide light fixture for a large ceiling height.

See all pendant lights and all chandeliers

How to adjust the cable and handle special cases?

There are three adjustment systems, from the simplest to the most definitive. Locate yours on the product sheet before buying.

  • Adjustable height. The cable slides in the rose, the small cover fixed to the ceiling, and locks at the desired length. It is ideal if you move often or if the table moves. The sheets indicate the adjustment limit, for example 120 cm for the Sylvara chandelier, 150 cm for the Sombora pendant light and 140 cm for the Olivora pendant light.
  • Long cable to adjust. The excess is wound or shortened at the time of installation. This is the case of the pendant lights delivered with a large length of cable.
  • Cable to shorten permanently. Always cut a little longer than your calculation, because you can shorten it again and never lengthen it. Cut the electricity at the panel before any intervention. At the slightest doubt, entrust the installation to an electrician.

If your table is extendable

Set the height and position for the table in its usual form, without its extensions. The pendant light remains centered on the closed table. On big meal days, cordless lamps placed at the ends complete the light.

If the light point is offset

The electrical outlet from the ceiling rarely falls in the center of the table. An offset hook, fixed above the center of the table, allows the cable to go diagonally before letting it descend again. Measure this complete path, longer than the simple vertical, before choosing your model.

If you sometimes move the table

Once the table is moved, the pendant light ends up in a passageway. You must then be able to raise it, to keep at least 2.00 m under the light fixture, and ideally 2.10 m. An adjustable cable becomes essential.

Table, island, bedside, living room: what heights?

Elsewhere in the house, the guides change. You do not look at the light the same way sitting, standing or lying down.

  • Dining table. Count 60 to 80 cm, with 75 cm as a guide, measured from the top of the table. The bottom of the light fixture is between 1.35 and 1.55 m from the floor.
  • Central island. Count 75 to 90 cm, with 80 cm as a guide, measured from the worktop. With a 90 cm top, the bottom of the light fixture is between 1.65 and 1.80 m from the floor.
  • Bedside pendant light. Count 1.20 to 1.40 m, measured from the floor. It occupies the same area as a reading sconce, next to the bed. The Galéora pendant light and its cable adjustable up to 170 cm are suitable for this use.
  • Living room, entrance, passage. Keep 2.00 m at minimum, and ideally 2.10 m, measured from the floor. Also check that the doors open without touching the light fixture.

The island is adjusted higher than the table because you work there standing up, often leaning over the worktop. You will find the number of pendant lights and the recommended shapes in our guide what light fixture for a central island.

Two Travéhalo pendant lights in travertine above a light wood kitchen island
Two Travéhalo pendant lights above an island. Their cable is adjustable up to 170 cm.

See the pendant lights for the kitchen

Three numerical examples

Ceiling at 2.50 m, table of 160 × 90 cm, a large fabric pendant light

The calculation gives 250 − 75 (the table) − 75 (the clear space) = 100 cm of drop, light fixture included. The model is wide but diffusing, so you keep the guide of 75 cm.

Our choice: the Calora pendant light in 58 cm wide, with the bottom of the light fixture at 1.50 m from the floor.

Ceiling at 3.20 m, round table of Ø 140 cm, a large pendant light

This large openwork model is placed at the top of the range, at 80 cm. The calculation gives 320 − 75 − 80 = 165 cm of drop to allow for.

Our choice: the Brisora pendant light in Ø 80 cm, with its cable adjustable up to 200 cm.

Ceiling at 2.70 m, table of 220 × 100 cm, three aligned domes

The calculation gives 270 − 75 − 75 = 120 cm of drop for each of the three pendant lights. All three are adjusted exactly at the same height.

Our choice: three Sombora pendant lights of Ø 30 cm, with their cable adjustable up to 150 cm.

The height mistakes to avoid

  • Measure from the floor. A table higher or lower than average ruins everything. Your reference remains the top of the table.
  • Forget the height of the light fixture. It is the bottom of the light fixture, including any pendants, that should be 60 to 80 cm above the table.
  • Keep the original length. The cable provided is almost never the right length for your room.
  • Do not cut the cable too short. Leave some margin, as a cut cable cannot be lengthened.
  • Stagger pendant lights in a row. Over a rectangular table, even the slightest difference in height will be immediately noticeable.

Your questions

How high should a pendant light be above a table?

Allow 60 to 80 cm between the top of the table and the bottom of the light fixture, with 75 cm as a guideline. For a standard table that is 75 cm high, the bottom of the pendant light will therefore be between 1.35 and 1.55 m above the floor.

How do you calculate the cable length of a pendant light?

Take the ceiling height, subtract the table height, and then subtract 75 cm. This gives you the total drop, including the light fixture. Under a 2.50 m ceiling with a 75 cm table, this is approximately 1 m. Then subtract the height of the light fixture to find the cable length.

How high should a light fixture be hung above a round table?

The rule is the same: 60 to 80 cm above the table, with the light fixture centered. If you install several globes at different heights, the lowest one must meet this range.

Can a pendant light be too low above a table?

Yes. Below 60 cm, it blocks the view between people sitting down and you risk hitting it when getting up. Only small models that emit a soft light can hang as low as 65 to 70 cm.

How high should a pendant light be above an island?

A little higher than above a table, so 75 to 90 cm above the worktop, with a guideline of around 80 cm. With a 90 cm worktop, the bottom of the light fixture will be between 1.65 and 1.80 m above the floor.

Should several pendant lights be set at the same height?

Yes, when they are aligned above a rectangular table, because even the slightest difference is noticeable. Only a group of pendant lights above a round table can have staggered heights. The lowest point must then remain 60 to 80 cm from the table.

Find the pendant light at the right height

Have you calculated your drop? Compare the cable lengths and sizes on the product pages.

View pendant lights and chandeliers

Free shipping · 30-day returns · Secure payment

Read also

Sublimar su salón con lámparas

Descubrir Descubrir
Published