What size pendant light for over a table? The calculation method

6 oct 2026
Suspension en tissu plissé bien proportionnée au-dessus d'une table en bois

For a pendant light above a table, choose a diameter equal to approximately half the table's width. For a round table, aim for 40% to 60% of its diameter. Never exceed the table's width minus 30 cm. With multiple pendant lights or a long light fixture, cover the middle half to two-thirds of the table's length.

This guide details these rules, then explains how to make adjustments based on the light fixture, the ceiling, and the room. If you want to calculate the size right away, follow our 4-step method. You'll also find a simple test to see the result before buying.

What size pendant light above a table?

To start, forget the room size. Above a table, the table sets the scale. Its width determines the diameter, and its length determines the number of light fixtures and the space they occupy. Three rules are enough.

Rule 1: half the width

For a single pendant light, the ideal diameter is approximately half the table's width. For a round table, choose half the diameter, within a range of 40% to 60%. The light fixture is then wide enough to illuminate all the plates, and narrow enough not to get in anyone's way.

Nuvora pleated fabric pendant light above an oval table in light stone
The Nuvora pleated fabric pendant light, in Ø 50 or 60 cm. Check that it leaves enough margin on the width of your table.

Rule 2: the 15 to 30 cm margin

Between the edge of the light fixture and the edge of the table, leave at least 15 cm, and ideally 30 cm. This distance prevents you from bumping into it when you get up and keeps the light above the table. It also gives the maximum diameter, which is the table's width minus 30 cm. On a table 90 cm wide, do not exceed Ø 60 cm.

45 cm, le point de départ15 cm60 cm au maximum15 cmLargeur de la table, 90 cm
On a table 90 cm wide, the pendant light starts at half, or 45 cm. It can go up to 60 cm, leaving at least 15 cm on each side.

Rule 3: the middle half to two-thirds of the length

When the table gets longer, a single pendant light is no longer enough. From 180 cm, you need two or three, or a long light fixture. The set then covers the middle half to two-thirds of the table's length. Measure from the center of the first pendant light to the center of the last, or along the length of the long light fixture.

Between two pendant lights, leave a space at least equal to their diameter. For models of Ø 25 to 35 cm, this means about 60 to 80 cm between their centers. You will find detailed configurations in our guide what pendant light for a rectangular table.

Your table Starting point and maximum Recommended guide
Rectangular, 120 × 80 cm From Ø 40 cm to Ø 50 cm Ø 35 to 45 cm
Rectangular, 140 × 90 cm From Ø 45 cm to Ø 60 cm Ø 45 to 50 cm
Rectangular, 160 × 90 cm From Ø 45 cm to Ø 60 cm Ø 50 to 60 cm, oval if possible
Round, Ø 90 cm From Ø 45 cm to Ø 60 cm Ø 35 to 45 cm
Round, Ø 120 cm From Ø 60 cm to Ø 90 cm Ø 50 to 65 cm
Round, Ø 150 cm From Ø 75 cm to Ø 120 cm Ø 60 to 80 cm

The maximum is a limit not to be exceeded, and your recommended guide always stays below it. This guide increases with the length of the table, because a single pendant light must then illuminate a larger area. It goes from Ø 45 to 50 cm for 140 cm long to Ø 50 to 60 cm for 160 cm.

All sizes and corresponding models are in our guide what pendant light diameter for a table of 120, 140, 160 or 180 cm.

How to adjust according to the visual weight of the light fixture?

Two pendant lights of the same diameter do not seem to occupy the same space. This visual weight depends on the material. The more opaque it is, the more massive the light fixture appears. It is what determines whether you aim for the bottom or the top of the range.

  • Opaque (lacquered metal, travertine, plaster effect). It looks like a solid volume. Stay towards the bottom or middle of the range. Its light is directed towards the table and illuminates it well.
  • Diffusing (paper, fabric, opal glass). The material lets soft light through and illuminates itself. The middle of the range suits it very well.
  • Openwork or transparent (rattan, wooden slats, clear glass, crystal). The eye passes through it. You can aim for the top of the range without weighing down the room.
White Velmora pendant light turned on above a raw wood dining table
The Velmora plaster-effect resin pendant light forms a solid volume. Choose its diameter towards the bottom or middle of the range.

Visual weight also plays a role in height. A large opaque model is set rather at 75 or 80 cm from the table, and a small diffusing model at 65 or 70 cm. Read our guide what height for a pendant light above a table for all cases.

See fabric pendant lights

What size according to the ceiling height?

Ceiling height does not change the diameter given by the table. It mainly limits the height of the light fixture itself and its effect in the room.

Low ceiling, less than 2.40 m

The pendant light remains possible above the table. Choose a flat model, and stay in the lower range of the diameter.

Orvella oval chandelier in gold crystal above a long light wood dining table
The Orvella chandelier measures 70 cm long by 7.6 cm thick. It also suits lower ceilings.

Standard ceiling, 2.50 m

The bottom of the light fixture can go down to about 1 m below the ceiling. This meter must contain the cable and the light fixture. A 45 cm high model therefore takes up almost half. The Pruméa chandelier, which measures 24 cm high, offers a large diameter without taking up much height.

Pruméa crystal chandelier above a round table set for dinner
The Pruméa K9 crystal chandelier exists from Ø 40 to Ø 100 cm, always with 24 cm high.

Great height, more than 3 m

The volume allows the top of the range and a higher light fixture. For a central chandelier, count up to 20 to 25% of the ceiling height, which is 65 to 80 cm high under 3.20 m. Keep 75 cm above the table thanks to a 1.5 to 2 m cable.

How to check the room size?

The room serves as a final check. For the main light fixture, add the length and width of the room in meters, then multiply by 8. You get the maximum diameter in centimeters.

In a 4 × 3.5 m dining room, (4 + 3.5) × 8 = 60 cm. An Ø 80 cm pendant light would look oversized there, even above a large table. In an open living room of 7 × 5 m, the calculation gives 96 cm and no longer limits anything. Only the table then decides the size.

Remember this logic. The table gives the ideal size, and the room gives the limit not to be exceeded. Between two sizes, take the larger one, because a slightly small pendant light quickly looks lost. The models offered in several diameters, like the Velmora pendant light or the Sérora pendant light, allow you to aim just right.

Lucéa chandelier with branches and small white diffusers above an oval dining table
The Lucéa chandelier exists in Ø 50, 72 or 98 cm. The Ø 72 cm suits a dining room, if the room allows it.

Pendant light size above a table: the 4-step method

Let's apply all this to a 160 × 90 cm table, in a 4 × 3.5 m dining room, under a 2.50 m ceiling.

  1. Measure the table and the room. Note the width and length of the table, or its diameter, the room dimensions and the ceiling height. Here, that gives 160 × 90 cm, 4 × 3.5 m and 2.50 m.
  2. Calculate the diameter range. Half of 90 cm gives 45 cm, and the maximum is 90 − 30 = 60 cm. Since the table is long, aim for the top, which is Ø 50 to 60 cm, and preferably an oval shape.
  3. Choose the number of light fixtures. At 160 cm, four configurations work. Take a pendant light of Ø 50 to 60 cm, or two pendant lights of Ø 30 to 40 cm. You can also take three pendant lights of Ø 20 to 25 cm, or a long light fixture of 80 to 110 cm. The light then covers about 80 to 105 cm in length.
  4. Adjust and validate. The room accepts up to (4 + 3.5) × 8 = 60 cm, so the choice is suitable. The 2.50 m ceiling leaves about 1 m for the cable and the light fixture.

Our choice: a Calora pendant light 58 cm wide, which diffuses the light, or two Velmora pendant lights in Ø 40 cm.

A round table of Ø 120 cm, in a 5 × 4 m living room, ceiling at 2.50 m

40 to 60% of 120 cm gives Ø 48 to 72 cm, and the chart recommends Ø 50 to 65 cm. The room accepts (5 + 4) × 8 = 72 cm, so it adds no limits. An openwork model can aim for the top of the range.

Our choice: the Brisora pendant light in Ø 60 cm, with its openwork wooden slats, or the Nuvora pendant light in Ø 60 cm, in pleated fabric that diffuses the light.

All the shapes suitable for round tables are in our guide what pendant light for a round table.

See all pendant lights and all chandeliers

How to visualize the size before buying?

Numbers reassure, and a full-size test helps you even more. Before ordering, represent the light fixture above the table with a cardboard box or a balloon. It's free, it takes a few minutes, and you thus avoid choosing too small.

  1. Cut out a cardboard disk. Give it the planned diameter. For a sphere-shaped model, rather inflate a balloon to this size.
  2. Hang it at the light point. The light point is the electrical outlet in the ceiling. Use a string and adhesive tape, with the bottom at 75 cm from the table.
  3. Look at it from three places. Look from the entrance of the room, standing near the table, then sitting. It must be clearly visible from the entrance and not block views once seated.
  4. Compare two sizes. Cut out a second disk at the larger size. Most often, the larger one fits best.

The most common sizing mistakes

The most common by far is the pendant light that is too small. In the store or in photos, it looks big. Once above a 160 cm table, it looks lost. On this 90 cm wide table, a Ø 30 cm gets lost in the middle. A Ø 55 cm fits in the recommended range. A Ø 75 cm exceeds the 15 cm margin limit.

  • Choosing too small. The light fixture disappears and the light only covers the center of the table. In case of doubt, go up one size.
  • Reasoning about the room rather than the table. The calculation with the length and width of the room gives a limit. The ideal size comes from the table.
  • Ignoring the margin. With less than 15 cm between the edge of the light fixture and the edge of the table, you bump into it when you get up.
  • Forgetting the height of the light fixture. Under 2.50 m, a very tall model takes up a large part of the meter available above the table.
  • Judging by photo. A product photo on a neutral background gives no scale. Always check the diameter in centimeters, then do the cardboard test.

Your questions

How to calculate the size of a pendant light above a table?

Take half the width of the table, or 40 to 60% of its diameter if it is round. Then check that the light fixture leaves at least 15 cm, and ideally 30 cm, to the edge of the table. For multiple pendant lights, the light must cover the middle half to two-thirds of the length.

What size pendant light for a 160 cm table?

For a 160 × 90 cm table, you have four possibilities. Take a pendant light of Ø 50 to 60 cm, oval if possible, or two pendant lights of Ø 30 to 40 cm. You can also take three pendant lights of Ø 20 to 25 cm, or a long light fixture of 80 to 110 cm.

Can a pendant light be too big for a table?

Yes, as soon as it leaves less than 15 cm between its edge and that of the table. Its diameter must not exceed the table's width minus 30 cm. In a small room, also add the length and width in meters, then multiply by 8. You get the maximum diameter in centimeters.

Should the size of the pendant light be adapted to the room?

The table gives the ideal size, and the room gives the limit. In a 4 × 3.5 m dining room, the calculation (4 + 3.5) × 8 limits the light fixture to 60 cm. In a large open living room, this calculation no longer limits anything and only the table counts.

What diameter to choose for multiple pendant lights above a table?

The more light fixtures there are, the smaller each one is. On a 160 cm table, count two pendant lights of Ø 30 to 40 cm or three of Ø 20 to 25 cm. On 180 cm, count three pendant lights of Ø 25 to 35 cm. The space between two pendant lights must remain at least equal to their diameter.

How to visualize the size of a pendant light before buying?

Cut out a cardboard disk at the planned diameter, or inflate a balloon to this size. Hang it 75 cm above the table. Look at it from the entrance, standing then sitting, and you will know if the size is suitable.

Find the right size for your table

Do you know your diameter? Compare the sizes and materials on the product pages.

View pendant lights and chandeliers

Free delivery · 30-day returns · Secure payment

You may also want to read

Sublimar su salón con lámparas

Descubrir Descubrir
Published